Planet IGSW-2840, User Manual

Page: 381 / 671

User’s Manual of IGSW-2840
381
Syntax
silent-time [seconds]
no silent-time
seconds -The number of seconds to disable console response.
(Range: 0-65535; 0: no silent-time)
Default Setting
The default value is no silent-time.
Command Mode
Line Configuration
Example
To set the silent time to 60 seconds, enter this command:
Console(config-line)#silent-time 60
Console(config-line)#
Related Commands
password-thresh
databits
This command sets the number of data bits per character that are interpreted and generated by the console port. Use the no
form to restore the default value.
Syntax
databits {7 | 8} no databits
7 - Seven data bits per character.
8 - Eight data bits per character.
Default Setting
8 data bits per character
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input from devices that generate 7 data bits with parity. If
parity is being generated, specify 7 data bits per character. If no parity is required, specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Console(config-line)#databits 7
Console(config-line)#
Related Commands
parity