User’s Manual of IGS-5225 series
86
The page includes the following fields:
Object
Description
•
IP Interfaces
Interface
The name of the interface.
Type
The address type of the entry. This may be
LINK
or
IPv4
.
Address
The current address of the interface (of the given type).
Status
The status flags of the interface (and/or address).
•
IP Routes
Network
The destination IP network or host address of this route.
Gateway
The gateway address of this route.
Status
The status flags of the route.
•
Neighbor Cache
IP Address
The IP address of the entry.
Link Address
The Link (MAC) address for which a binding to the IP address given exists.
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page.
4.2.1.4 Users Configuration
This page provides an overview of the current users. Currently the only way to login as another user on the web server is to
close and reopen the browser. After setup is completed, press the
“Apply”
button to take effect. Please login web interface with
new user name and password; the screen in
Figure 4-2-4
appears.
Figure 4-2-4:
Users Configuration Page Screenshot
The page includes the following fields:
Object
Description
•
User Name
The name identifying the user. This is also a link to Add/Edit User.
•
Privilege Level
The privilege level of the user.
The allowed range is
0
to
15
. If the privilege level value is 15, it can access all
groups, i.e. that is granted the full control of the device. But other values need to
refer to each group privilege level. User's privilege should be the same or greater
than the group privilege level to have the access to that group.
