User’s Manual of IGS-5225 series
75
4. WEB CONFIGURATION
This section introduces the configuration and functions of the Web-based management.
About Web-based Management
The
Industrial Managed Switch
offers management features that allow users to manage the
Industrial Managed Switch
from
anywhere on the network through a standard browser such as Microsoft Internet Explorer.
The Web-based Management supports Internet Explorer 8.0. It is based on Java Applets with an aim to reducing network
bandwidth consumption, enhancing access speed and presenting an easy viewing screen.
By default, IE7.0 or later version does not allow Java Applets to open sockets. The user has to
explicitly modify the browser setting to enable Java Applets to use network ports.
The
Industrial Managed Switch
can be configured through an Ethernet connection, making sure the manager PC must be set
to the same the IP subnet address with the
Industrial Managed Switch
.
For example, the default IP address of the
Industrial Managed Switch
is
192.168.0.100
, then the manager PC should be set
to
192.168.0.x
(where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
If you have changed the default IP address of the
Industrial Managed Switch
to 192.168.1.1 with subnet mask 255.255.255.0
via console, then the manager PC should be set to 192.168.1.x (where x is a number between 2 and 254) to do the related
configuration on manager PC.
Figure 4-1-1:
Web Management
Logging on to the Industrial Managed Switch
1.
Use Internet Explorer 7.0 or above Web browser. Enter the factory-default IP address to access the Web interface. The
factory-default IP address is as follows:
