User’s Manual of IGS-5225 series
104
4.2.1.15 SMTP Configuration
This page facilitates an SMTP Configuration on the switch. The SMTP Configure screen in
Figure 4-2-18
appears.
Figure 4-2-18:
SMTP Configuration Page Screenshot
The page includes the following fields:
Object
Description
•
SMTP Mode
Controls whether SMTP is enabled on this switch.
•
SMTP Server
Type the SMTP server name or the IP address of the SMTP server.
•
SMTP Port
Set port number of SMTP service.
•
SMTP Authentication
Controls whether SMTP authentication is enabled if authentication is required
when an e-mail is sent.
•
Authentication User
Name
Type the user name for the SMTP server if Authentication is Enabled.
•
Authentication
Password
Type the password for the SMTP server if Authentication is Enabled.
•
E-mail From
Type the sender’s e-mail address. This address is used for reply e-mails.
•
E-mail Subject
Type the subject/title of the e-mail.
•
E-mail 1 To
Type the receiver’s e-mail address.
•
E-mail 2 To
