12
3. Installation
3.1 DIN-rail Mounting Installation
The DIN-rail is screwed on the Industrial Gigabit Ethernet Switch when
out of factory. When you need to replace the wall-mount application
with DIN-rail application on Industrial Gigabit Ethernet Switch, please
refer to the following figures to screw the DIN-rail on the Industrial
Gigabit Ethernet Switch. To hang the Industrial Gigabit Ethernet Switch,
follow the steps below:
Step 1:
Screw the DIN-rail on the Industrial Gigabit Ethernet Switch.
Step 2:
Place the bottom of DIN-rail lightly into the track.
