User’s Manual of IGS-20040MT
2.1.2 Front Panel
Figure 2-1
shows the front panel of
Industrial Managed Switch
.
Figure 2-1: IGS-20040MT
Switch Front Panel
■
Gigabit TP interface
10/100/1000Base-T Copper, RJ45 Twist-Pair: Up to 100 meters.
■
SFP slot
100/1000Base-X mini-GBIC slot, SFP (Small-form Factor Pluggable) transceiver module: From 550 meters to 2km
(multi-mode fiber), up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber).
■
Console Port
The console port is an RJ45 port connector. It is an interface for connecting a terminal directly. Through the console port, it
provides rich diagnostic information including IP address setting, factory reset, port management, link status and system
setting. Users can use the attached DB9 to RJ45 console cable in the package and connect to the console port on the
device. After the connection, users can run any terminal emulation program (Hyper Terminal, ProComm Plus, Telix,
Winterm and so on) to enter the startup screen of the device.
23
Summary of Contents for IGS-20040MT
Page 1: ......
