manualshive.com logo in svg

Planet IGS-10020MT, User Manual, Page: 227 / 563

Share
Download
Planet IGS-10020MT User Manual Download Page 227

User’s Manual of IGS-10020MT 

 

The page includes the following fields: 

Object 

Description 

 

Port

 

The logical port for the settings contained in the same row. 

 

Policy ID

 

Select the policy to apply to this port. The allowed values are 

1

 through 

8

. The 

default value is 

1

. 

 

Action

 

Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default 

value is 

"Permit"

. 

All 

means all ports will have one specific setting. 

 

Rate Limiter ID

 

Select which rate limiter to apply to this port. The allowed values are 

Disabled

 

or the values 

1

 through 

15

. The default value is 

"Disabled"

. 

All 

means all ports 

will have one specific setting. 

 

EVC Policer 

Select whether EVC policer is enabled or disabled. The default value is 

"Disabled"

. 

All 

means all ports will have one specific setting. 

 

EVC Policer ID 

Select which EVC policer ID to apply on this port. The allowed values are 

Disabled

 or the values 

1

 through 

128

. 

 

Port Redirect

 

Select which port frames are redirected on. The allowed values are 

Disabled

 or 

a specific port number. The default value is

 "Disabled"

. 

All 

means all ports will 

have one specific setting. 

 

Mirror 

Specify the mirror operation of this port. The allowed values are:   

Enabled

: Frames received on the port are mirrored.   

Disabled

: Frames received on the port are not mirrored.   

The default value is

 "Disabled".

 

All 

means all ports will have one specific setting. 

 

Logging 

Specify the logging operation of this port. The allowed values are:   

Enabled

: Frames received on the port are stored in the System Log.   

Disabled

: Frames received on the port are not logged.   

The default value is

 "Disabled"

.  

Please note that the System Log memory size and logging rate is limited. 

All 

means all ports will have one specific setting.

 

 

Shutdown 

Specify the port shut down operation of this port. The allowed values are:   

Enabled

: If a frame is received on the port, the port will be disabled.

   

Disabled

:

 

Port shut down is disabled. 

The default value is 

"Disabled"

. 

All 

means all ports will have one specific setting. 

 

State 

Specify the port state of this port. The allowed values are: 

Enabled

: To reopen ports by changing the volatile port configuration of the ACL 

user module. 

Disabled

: To close ports by changing the volatile port configuration of the ACL 

user module. 

The default value is 

"Enabled"

. 

 

227 

 

Summary of Contents for IGS-10020MT




















































































































































































































































































































































































































































































































































































Reviews:

No comments