8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the Industrial
Managed PoE+ Switch and the terminal will display “running testing procedures”.
Note
The following console screen is based on the IGS-10020HPT.
The display of the IGS-10020PT is the same as that of the IGS-
10020HPT.
When the following dialog box shown in Figure 4-3 appears, please enter the
factory default user name
“admin”
and password
“admin”
.
User name:
admin
Password:
admin
Figure 4-3:
Console Login Screen
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
