User’s Manual
99
4.2.18 Web Firmware Upgrade
This page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen in
Figure 4-2-20
appears.
Figure 4-2-20:
Web Firmware Upgrade page Screenshot
To open
Firmware Upgrade
screen, perform the following:
1. Click
System
-> Web
Firmware Upgrade
.
2. The Firmware Upgrade screen is displayed as in
Figure 4-2-21
.
3. Click the “
“button of the Main page, the system would pop up the file selection menu to choose firmware.
4. Select on the firmware then click “
”, the
Software Upload Progress
would show the file with upload status.
5. Once the software is loaded to the system successfully, the following screen appears. The system will load the new
software after reboot.
Figure 4-2-21:
Software Successfully Loaded Notice Screen
DO NOT Power OFF
the Industrial Managed Switch until the update progress is completed.
Do not quit the Firmware Upgrade page without pressing the “
OK
” button after the image is
loaded. Or the system won’t apply the new firmware. User has to repeat the firmware
upgrade process.
Summary of Contents for IGS-10020
