Planet IGS-10020, User Manual

Page: 94 / 409

User’s Manual
94
4.2.14 Remote Syslog
Configure remote syslog on this page. The Remote Syslog screen in Figure 4-2-16 appears.
Figure 4-2-16:
Remote Syslog page Screenshot
The page includes the following fields:
Object Description
•
Mode
Indicates the server mode operation. When the mode operation is enabled, the
syslog message will send out to syslog server. The syslog protocol is based on
UDP communication and received on UDP port 514 and the syslog server will not
send acknowledgments back to sender since UDP is a connectionless protocol
and it does not provide acknowledgments. The syslog packet will always be sent
out even if the syslog server does not exist. Possible modes are:

Enabled
: Enable remote syslog mode operation.

Disabled
: Disable remote syslog mode operation.
•
Syslog Server IP
Indicates the IPv4 host address of syslog server. If the switch provides DNS
feature, it also can be a host name.
•
Syslog Level
Indicates what kind of message will be sent to syslog server. Possible modes
are:

Info
: Send information, warnings and errors.

Warning
: Send warnings and errors.

Error
: Send errors.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.