User’s Manual of ICS-11x Serial Device Server Series
73
5.3 COM Port Mapping
This function should be set as
VCOM mode
on the serial server. VCOM software will create the corresponding virtual COM
ports for com port mapping as shown in
Figure 5-3-1
.
Figure 5-3-1 :
VCOM software
Add Virtual COM port
1. Click "Search" to search the network for device servers.
2. Once a server has been found, select it to add it to the COM mapping list and Click "OK" to take effect as shown in
Figure
5-3-2
.
Figure 5-3-2 :
VCOM software
3. Virtual com ports are generated as shown in
Figure 5-3-3
.
Figure 5-3-3 :
Virtual COM Ports
Summary of Contents for ICS-11 Series
Page 8: ...User s Manual of ICS 11x Serial Device Server Series 8 ...
Page 15: ...User s Manual of ICS 11x Serial Device Server Series 15 ICS 115A 94 x 70 x 26mm W x D x H ...
Page 16: ...User s Manual of ICS 11x Serial Device Server Series 16 ICS 120 94 x 70 x 26mm W x D x H ...
Page 20: ...User s Manual of ICS 11x Serial Device Server Series 20 2 1 6 Serial Port Pin Define ...