User’s Manual of ICS-10x
-65-
1. This utility show all necessary information from the devices, such as MAC Address, Device Name, firmware version,
Device IP Subnet address, also can assign new password, IP Subnet address and description for the devices.
2. After setup completed, press
“Update Device”
,
“Update Multi”
or
“Update All”
button to take affect. The meaning of
the 3 buttons above are shown as below:
Update Device
: use current setting on one single device.
Update Multi:
use current setting on choose multi-devices.
Update All:
use current setting on whole devices in the list.
The same functions mentioned above also can be finding in
“Option”
tools bar.
3. To click the
“Control Packet Force Broadcast”
function, it can allow assign new setting value to the Web Smart
Switch under different IP subnet address.
6. Press
“Connect to Device”
button then the Web login screen appears.
7. Press
“Exit”
button to shutdown the planet Smart Discovery Utility.
A.2 Device‘s RS-232/RS-422/RS-485 Pin Assignments
DB9 Pin Define for RS-232 / RS-422 / RS-485
DB9-PIN
RS-232
RS-422/485
4-wire
RS-485
2-wire
1 DCD
2 RXD
3 TXD
4 DTR
RX-
Data
B(-)
5 GND
6 DSR
TX-
7 RTS
RX+
Data
A(+)
8 CTS
TX+
9 RI
A.3 Device‘s RJ-45 Pin Assignments
■
10/100Mbps, 10/100Base-TX
Contact
MDI
MDI-X
1 1
(TX
+) 3
2 2
(TX
-) 6
3 3
(RX
+) 1
6
6 (RX -)
2
4, 5, 7, 8
Not used
Not used
Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly
forbidden, is beyond the scope of this standard.
