7. General Operation
Before making a video call, please make sure that the unit has been installed and set
up successfully.
When trying to make a video call, the user sees the following picture.
When connecting, the user sees the picture below.
7.1 Making Video Calls
◎
Under General State
1.
In standby mode, pick up the handset or press the [
Speaker
] button. Then dial the
IP address of the remote site.
2.
Press the [
ENTER
] button to confirm and commence the Internet connecting.
3.
When the connection is set up successfully, the video communication will start
and the remote site video will be shown on the screen of local site.
4.
Please hang up the handset or press the [
Speaker
] again to end the Video Phone
call.
44
