a
Upgrading the System Software
Please set the network mode to “Manual”, “DHCP”, or “PPPoE” first.
◎
Manual
1.
Use the number keys to input your subnet Mask IP address.
(You can also use the keypad to input characters directly.)
2.
Use the number keys to input your User IP address.
3.
Use the number keys to input your Router IP address.
4.
Use the number keys to input your Update IP address.
5.
Press [
ESC
] to save the setting and start upgrading the software.
(It will take about fifteen seconds to start upgrading. Please wait patiently.)
◎
DHCP
1.
Use the [
▼
] key to go to Update IP Address and input your Update IP address.
2.
Press [
ESC
] to save the setting and start upgrading the software.
(It will take about fifteen seconds to start upgrading. Please wait patiently.)
33
