3.
Press [
▼
] to select “OK” and press [
ENTER
] to save the setting.
a
UDP Base Port
UDP Base port is for transmit audio and video data. The port number is set to 5000 by
default. (If you set it over the maximum number 65536, system will adjust it to 65000
automatically.) If you’re not using NAT, you may skip this item.
1.
Advanced
Æ
select “UDP Base Port.”
2.
Press [
ENTER
] and input the UDP Base port number.
3.
Press [
▼
] to select “OK” and press [
ENTER
] to save the setting.
a
Default
You can use this function to initialize System Configuration to default value.
1.
Advanced
Æ
select “Default.”
2.
Press [
▲
] or [
▼
] to select the setting you want.
No Action
– Retain the present setting
Configuration – Initiate system configurations to default value
Phone Book
– Initiate phone book to default value
Call History
– Initiate call history record to default value
3.
Press [
ENTER
] to return to the previous page.
a
Picture Quality
This function is responsible for the video quality sent to the remote site. There are
four kinds of format (Auto, CIF, QCIF, SQCIF) provided.
1.
Advanced
Æ
select “Picture Quality.”
2.
Press [
▲
] or [
▼
] to select the setting you want.
Auto
– The system automatically switches for the best picture quality.
CIF
– It is ISO standard of Sharp. (352 × 288 pixels)
QCIF
– It is ISO standard of Good. (176 × 144 pixels)
SQCIF – It is ISO standard of Smooth. (128 × 96 pixels)
31
