5. System Configuration
After power on, the PWR/LNK LED on the top-right of LCD monitor turn red to
indicate it have received power. The LED will then turn green if the Ethernet network
connection is established. The conferencing phone should take about 30 seconds to
make power on self-test and system start up. In this period, the screen will show local
images. Please do not press any button on this period.
After the booting process is completed, the following page is shown on the LCD
monitor.
Press
[Menu]
button, a System Configuration page is shown. Please use
[
▲
]
,
[
►
]
,
[
▼
],
and
[
◄
]
to move the highlight to the function you need to configure and
[Enter]
to enter the function menu.
5.1 General
19
