2 Mega-Pixel Wireless Fish-Eye IP Camera
ICA-HM830W
the terminals as an implementation. In this case, current (or/and
voltage) limitation is specified by the external Relay.
2.3 Hardware Installation
2.3.1 Physical Installation
Step 1.
Prepare a PC with Ethernet link to the network
Step 2.
Connect an Ethernet cable
Connect LAN port (RJ-45) of the IP Camera to a network switch.
Step 3.
Attach the power supply
.
Plug in power adapter to IP Camera and connect the other end to power outlet.
Only use the power adapter supplied with IP Camera; otherwise, the product may
be damaged.
Step 4.
Plug Power on 110v or 220V
Ensure the power adaptor specification matches the power system (110V AC or
220V AC) and connect the adaptor to the outlet
Step 5.
Check LED status
The Power LED is defined to identify IP Camera status. When IP Camera is booting,
the LED will be flashing and the IP Camera’s LED is ready to light in green.
15
