3.11 E-Mail
You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users
want to send the alarm message out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP Server
Type the SMTP server name or the IP address of the SMTP
server.
Test
Send a test mail to mail server to check this account is available
or not.
SMTP Port
Set port number of SMTP service.
SMTP Authentication
Select the authentication required when you send an e-mail.
Disable
If no authentication is required when an e-mail is sent.
Enable
If authentication is required when an e-mail is sent.
Authentication User Name
Type the user name for the SMTP server if Authentication is
Enable.
Authentication Password
Type the password for the SMTP server if Authentication is
Enable.
E-mail To
Type the receiver’s e-mail address.
E-mail From
Type the sender’s E-mail address. This address is used for reply
e-mails.
E-mail Subject
Type the subject/title of the e-mail.
61
