Step 5 : Opening the Dialog Box for Further Configuration
Select the IP Camera you want to configure and input its IP address
into the browser search bar.
The IP Camera will be connected via Web browser automatically; the
IP Camera will prompt for logon user name and password. Please enter
admin
as the default user name and password.
When the device is logged on for the first time, the browser will prompt
a message; please click
“Allow”
to install controls.
Note
If IE9 or higher version browser is used, it is suggested
that the PLANET camera Web link should be added as a
trusted site.
Step 6: Adjusting Lens Angle and Re-mounting the Case
Manually adjust lens angle that you want the area to be monitored.
After adjusting the angle, re-mount the case.
Appendix A : Default Setting
Default DHCP Client
On
Default IP Address
192.168.0.20 – if DHCP does not exist in
the network
Default Login User Name
admin
Default Login Password
admin
Search Tools
Smart Discovery Lite
Further Configuration
For detailed configuration, please check user’s manual on the bundled CD.
If you have any other question, please contact the dealer where you
purchased this product or you can contact PLANET directly at the following
email address: [email protected]
2011-AB8050-000
