-
57
-
5.3.2.2
Playback Instant Recorded Video
Follow the steps to playback a video recorded by “Instant Recording”.
•
Click <Play> on main window toolbar and click <Local Playback> tab.
•
Click <Open> to choose a recorded file.
•
Click <OK> to start playing the recorded video.
5.3.3 Playback Video
The remote monitoring software allows users to either view recorded video from the DVR, or
from the hard disk drive of the PC.
To access the Playback screen, click <Play> button on the main window toolbar. There are
three tabs in the Playback screen: <Remote Playback>, <Local Playback>, and <Verify> tabs.
<Remote Playback> allows users to play back from the DVR. <Local Playback> enables users to
playback a recorded video file stored on the hard disk drive of the PC. <Verify> is provided for
users to authenticate if the exported video is altered.
The DVR continues recording while playing back recorded video on the PC, either remote
playback or local playback.
5.3.3.1
Playback Remote Video
To view remote video, click <Play> on the main window toolbar, and then <Remote
Playback> tab. The <Remote Playback> screen will be displayed.
The <From> and <To> in the <Available Record Video> display the date and time from
which recorded video is available for playback.
To playback remote video segments, follow these steps:
•
Choose <Playback> in <Select> field for playback recorded video.
•
In <Start> field, users can change the date and time either by typing desired numbers directly
or by using the arrow buttons.
To type directly:
Click on day, month and year of date field respectively, and type the desired numbers
directly. Follow above steps to adjust the hour, minute and second of time field.
To use the arrow buttons:
Click on the arrow button next to the date field to display the calendar; then click the
left and right arrow at the top of the calendar to change the date. Use up and down arrow
next to the time field to change to the wanted time.
