-
26
-
3. Preset Config
4. Per Camera Config
5. ezRecord Setup
6. Data Lifetime
7. Pre-Alarm Recording
8. Circular Recording
9. Audio Recording
10. Purge Data
Best Quality
0 Days
15 Sec
ON
ON
3.6.1 Schedule Setup
The Schedule Setup is used to set the day and night time, or weekend recording schedule. Select
<Schedule Setup> from the Record Setup menu and press ENTER; the following menu is displayed.
Schedule Setup
1. Day Time Start
2. Day Time End
3. Night Time Start
4. Night Time End
5. Weekend Schedule
6. Weekend Start
7. Weekend End
AM06:00
PM06:00
PM18:00
AM06:00
ON
Fri AM18:00
Mon PM06:00
•
Make appropriate changes of the start time of Day and Night Time using Direction keys.
•
Press ENTER to confirm the settings or ESC to cancel.
•
If a weekend record is required, select <ON> to enable the Weekend Schedule in advance and
then set the Weekend Start/End time.
•
Press ESC to return to previous page.
3.6.2 Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame rate. In normal
circumstances, it is strongly recommended to set the preset configuration as <Best Quality>. Below
table shows the PPS and picture size under <Best Quality> in Half-D1 mode. Please refer to OSD
Setup Manual, Section
Preset Record Configuration
for further information.
Half-D1 mode (NTSC: 720x240@120PPS; PAL: 720x288@100PPS)
Normal PPS
Normal Size
Event PPS
Event Size
7.5 NTSC
(6.25 PAL)
12 KB / Pic
30 NTSC
(25 PAL)
12 KB / Pic
