![background image](http://html.mh-extra.com/html/planet/hdp-1160pt/hdp-1160pt_quick-installation-manual_1562379001.webp)
– 1 –
– 2 –
1. Package Contents
Thank you for choosing PLANET HDP-1160PT. Before installing the door
phone, please verify the contents inside the package box.
The package should contain the following items:
The Vandalproof Door
Phone
Quick Installation
Guide
Mounting Label
Screw Kit
Connector
Wrench
2. Physical Specifications
Dimensions (W x D x H)
120 x 34 x 195 mm
Weight
1015g (gross weight)
2.1 Front Panel
IR LED
Speaker
Camera
DSS key
Mic
Interface
Description
IR LED
The door phone provides 3 IR LEDs for clear image in low
light condition.
Camera
The door phone has a built-in IP camera supporting a
high-resolution video of up to 1280 x 720 pixels.
Speaker
The door phone has a built-in speaker for convenient
communication and alert use.
DSS Key
Press the Direct Station Selection key to check who the
caller is before opening the doors, or talking to him/her.
Mic
The door phone has a built-in microphone hidden in the
pinhole located on the front panel.
2.2 Function key LED state
Type
LED
State
DSS Key
(Speed dial
button)
Normally on
Successfully registered
Quick flashing
Registration failed/network abnormal
Slow flashing
In call
2.3 I/O Control Description
Open the rear case of the device and find a row of terminal blocks for
connecting the power supply, electric lock control, etc. The connections
are shown in the table below:
Number Description
Wiring port
description
(example above)
1
Ethernet interface: Standard RJ45
interface, 10/100M adaptive, it is
recommended to use Cat 5e cable
-
2
Power interface: DC 12V, 1A input
Left: positive (+)
Right: grounded (–)
3, 5
Two groups of short-circuit input
detection interfaces: For connecting
switches, infrared probes, door magnets,
vibration sensors and other input
devices
Left: IN
Right: OUT