Planet GSD-501 User Manual Download Page 1

Trademarks

Copyright © PLANET Technology Corp. 2003.

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.  All other trade-

marks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in 

all  environments  and  applications,  and  makes  no  warranty  and  representa-

tion,  either  implied  or  expressed,  with  respect  to  the  quality,  performance, 

merchantability, or fitness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; 

PLANET  disclaims  liability  for  any  inaccuracies  or  omissions  that  may  have 

occurred.

Information in this User’s Manual is subject to change without notice and does 

not represent a commitment on the part of PLANET. PLANET assumes no re-

sponsibility for any inaccuracies that may be contained in this User’s Manual. 

PLANET  makes  no  commitment  to  update  or  keep  current  the  information 

in this User’s Manual, and reserves the right to make improvements to this 

User’s Manual and/or to the products described in this User’s Manual, at any 

time without notice.

If you find information in this manual that is incorrect, misleading, or incom-

plete, we would appreciate your comments and suggestions.

FCC Warning

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a 

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference when 

the equipment is operated in a commercial environment. This equipment gen-

erates, uses, and can radiate radio frequency energy and, if not installed and 

used in accordance with the Instruction manual, may cause harmful interfer-

ence  to  radio  communications.  Operation  of  this  equipment  in  a  residential 

area  is  likely  to  cause  harmful  interference  in  which  case  the  user  will  be 

required to correct the interference at his own expense. 

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause 

radio interference, in which case the user may be required to take adequate 

measures.

Revision

PLANET Gigabit Ethernet Switch User’s Manual

FOR MODELS: GSD-801/501

Part No.: EM_GSD801

Summary of Contents for GSD-501



















Reviews: