GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- -
24
4.2.3 Bridge
If you want to setup advanced filter function while GRT-501 is working in bridge mode, you
can use
BRIDGE
menu to setup the filter function, blocking function.
Web UI Configuration
Step 1.
Click
Bridge
to start Bridge configuration.
Step 2.
Press
Add
in the bottom of web page to
add the static bridge information.
If you want to filter the
designated
MAC
address of LAN PC to access Internet,
press
Add
to establish the filtering table.
Put the MAC address in
MAC Address
field and select
Filter
in
LAN
field.
If you want to filter the
designated
MAC
address of WAN PC to access LAN,
press
Add
to establish the filtering table.
Key the MAC address in
MAC Address
field and select Filter in WAN field.
For example:
If your VC is setup at WAN 1, select WAN
1 Filter.
Step 3.
Press
Finish
to finish setting.
The screen will prompt the parameters
that will be written in EPROM. Check the
parameters before writing in EPROM.
Press
Restart
to restart the router
working with new parameters or press
Continue
to setup another parameter.
