User’s Manual of GSD-800S / GSD-802S / GSD-802PS
4.3 Port Configuration
This function allows displaying each port’s status. The Link Status
in the screen displays the current connection speed and
duplex mode; else this function will show
down
when the port is disconnected. Press the
“Refresh”
button to renew the
screen. The screen in Figure 4-4 appears.
Figure 4-4
Port Configuration screen
The page includes the following configurable data:
•
All Ports Jumbo
Frames Setting
The maximum Ethernet frame size the interface supports or is configured,
including Ethernet header, CRC, and payload. Draw the menu bar to select the
mode.
•
Disable - The default maximum frame size is 1518.
•
4096 Kbytes – Set the maximum frame size to 4096 Bytes.
•
9600 Kbytes - Set the maximum frame size to 9600 Bytes.
•
Drop frames after
excessive collisions
Enable or Disable the device to drop frames once the excessive collisions be
detected.
•
Port
Indicate port 1 to port 8.
•
Mode
Allow configuring the port speed and operation mode. Draw the menu bar to
select the mode.
•
Auto Speed
- Setup Auto negotiation.
•
10 half
- Force sets 10Mbps/Half-Duplex mode.
•
10 Full
- Force sets 10Mbps/Full-Duplex mode.
•
100 half
- Force sets 100Mbps/Half-Duplex mode.
•
100 full
- Force sets 100Mbps/Full-Duplex mode.
•
1000 full
- Force sets 10000Mbps/Full-Duplex mode.
•
Disable
- Shutdown the port manually.
