GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
6.4
Administration
This session introduces security and simple network management protocol (SNMP) and time
synchronous.
6.4.1 Security
For system secutiry, suggest to change the default user name and password in the first setup
otherwise unauthorized persons can access the router and change the parameters.
There are three ways to configure the router: Web browser, telnet and serial console.
Press
Security
to setup the parameters.
For greater security, change the Supervisor ID and password for the gateway. If you don’t set them,
all users on your network can be able to access the gateway using the default IP and Password
root.
You can authorize five legal users to access the router via telnet or console. There are two UI
modes:
menu driven mode
and
line command mode
to configure the router.
87
Summary of Contents for G.SHDSL.bis Bridge Router GRT-504
Page 1: ...4 Wire G SHDSL bis Firewall Router GRT 504 User s Manual...
Page 12: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 1 3 Applications 11...
Page 24: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 23...
Page 25: ...GRT 504 4 Wire G SHDSL bis Firewall Router User s Manual 24...
