manualshive.com logo in svg

Planet FPS-3300, User Manual, Page: 14 / 71

Share
Download
Planet FPS-3300 User Manual Download Page 14

4.  Configure with PSAdmin 

FPS-3300 has provide a Windows base utility for user to configure. After the configuration utility is successfully 
installed, starts PSAdmin utility from your Windows Start menu: 

Start -> All Programs -> PSAdmin

. The 

screen will then appear as follow picture. 

 

 

 

All print server(s) feature Novell NetWare function on the LAN will be displayed along with 
their respective device name, MAC Address, print server name, firmware version, and status.  
The terms are defined as follows: 
 

Device Name

: The name of the print server hardware used for identification purposes. 

 

MAC Address

: The Ethernet address of the print server. 

 

Print server Name

: The print server to which the device is attached. 

 

Version

: The firmware version of the print server. 

 

Status

: To come up a Printer’s status presently. 

 

 

4.1 Wizard 

FPS-3300 has provided two wizards for user to configure the print server step by step. When 

click the icon <

>, you will see Configuration Wizard screen.  

 

 

 

14

Summary of Contents for FPS-3300








































































Reviews:

No comments