4. Using the MFP
After you have followed the install wizard to finish the MFP installation, the MFP is now
connected to your computer. You can start sharing print, scan, fax and card reader functions
provided on the MFP.
Note:
If you have finished using the MFP, please click “Disconnect” to release the MFP from your
PC. When there is a user using or connecting MFP, the other users can’t use the MFP until
the MFP is released. You may refer to MFP Server manual to setup the disconnect time to
make the users auto-disconnect when the MFP is no operation over the time.
4.1
Share Printer and Fax
13
The MFP will be added to “Printers and Faxes” in the Windows after the MFP is installed.
When you have connected to the MFP by clicking “Connect” in the “MFP Server Control
Manager”, the MFP Server will auto create the connection between the MFP and your
computer and then you can print a document just follows the same steps as usual.
