0
10/100Mbps Switch
FNSW-1600
FNSW-2400
Modules
FNSW-B01ST / FNSW-B01SC
Quick Installation Guide
Page 1: ...0 10 100Mbps Switch FNSW 1600 FNSW 2400 Modules FNSW B01ST FNSW B01SC Quick Installation Guide ...
Page 2: ...erence to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user s own expense Revision This installation guide is used for PLANET NOVASwitch series Model FNSW B01ST FNSW B01SC Revision 1 0 July 1999 Part No EMQFNSWB01 Copyright 1999 Planet Technology Corp Content...
Page 3: ...allation Guide Part Two Installation Installation Steps 1 Cabling Guidelines Maximum length of a multi mode fiber cable 62 5 125µm is 2 kilometers 6560 feet for full duplex or 412 meters 1351 feet for half duplex 100Base FX after module installed 2 Power off the FNSW 1600 FNSW 2400 and remove the unit from the 19 inch rack 3 Release the two screws to remove the module cover 4 Slide in the module f...
Page 4: ...power on the unit and the connected devices the Link LED indicator of port 9 13 will blink Orange to indicate module installed and the fiber port has detected a good link Note The LINK LED indicator of port 9 13 will shows steady Orange as a good link and will blink Orange if there is any network activity in this port This is especially designed to indicate this port is with fiber module installed...
