Planet EPN-402NV, User Manual, Page: 22 / 104

User Manual of EPN-402NV
-16-
Chapter 4. Quick Installation Guide
This chapter will show you how to configure the basic functions of your Wi-Fi ONU.
A computer with wired Ethernet connection to the Wi-Fi ONU is required for the first-time
configuration.
4.1 Manual Network Setup - TCP/IP Configuration
The default IP address of the Wi-Fi ONU is 192.168.1.1 and the default Subnet Mask is 255.255.255.0 . These
values can be changed as you desire in the web UI of the Wi-Fi ONU. In this section, we use all the default
values for description.
Whether the Wi-Fi ONU is configured via wired or wireless connection, the PC needs to be assigned an IP
address first. Before you connect the local PC to the Wi-Fi ONU via wired or wireless connection, please
configure the IP address for your PC in the following two ways first.
 Obtaining an IP address automatically
 Configuring the IP address manually
In the following sections, we’ll introduce how to install and configure the TCP/IP correctly in Windows 7 . And the
procedures in other operating systems are similar. First, make sure your Ethernet Adapter is working, and refer
to the Ethernet adapter’s manual if needed.
4.1.1 Obtaining an IP Address Automatically
Summary:
1. Set up the TCP/IP Protocol in " Obtain an IP address automatically " mode on your PC.
2. Then the Wi-Fi ONU built-in DHCP server will assign IP address to the PC automatically.
If you are sure the DHCP server of Wi-Fi ONU is enabled (the default setting of ONU Mode ), you can set up the
TCP/IP Protocol in " Obtain an IP address automatically " mode on your PC. And then the Wi-Fi ONU built-in
DHCP server will assign an IP address to the PC automatically.
1. Installing TCP/IP Component
1) On the Windows taskbar, click the Start button, point to Control Panel and then click it.
2) Under the Network and Internet icon, click on the View network status and tasks. And then click