802.11n
Wireless
ADSL
2/2+
Router
ADN
‐
4102
47
for your LAN to learn the routes used within your corporate network, they should both be configured
with RIP.
¾
Your ISP requests that you run RIP for communication with devices on their network.
The following table describes the parameters:
Field
Description
RIP
You can select
OFF
or
ON
. In this example,
OFF
is selected.
Apply
Click it to save the settings on this page.
Interface
Choose the router interface that uses RIP.
Recv Version
Choose the interface version that receives RIP messages. You can choose
RIP1
,
RIP2
, or
Both
.
Choose
RIP1
to indicate the router receives RIP v1 messages.
Choose
RIP2
to
indicate the router receives RIP v2 messages.
Choose
Both
to indicate the router receives RIP v1 and RIP v2 messages.
Send Version
The working mode for sending RIP messages. You can choose
RIP1
or
RIP2
.
Choose
RIP1
to indicate the router broadcasts RIP1 messages only.
Choose
RIP2
to indicate the router multicasts RIP2 messages only.
Add
Click it to add the RIP interface to the
Rip Config List
.
Delete
Select a row in the
Rip Config List
and click it to delete the row.
3.6.2 NAT
Choose
Advanced
>
NAT
and the page shown in the following figure appears. The page displayed
contains
DMZ
,
Virtual Server
,
ALG
,
NAT Exclude IP
,
Port Trigger
,
FTP ALG Port
, and
NAT IP
Mapping
.
