The following table describes the parameters of this page:
Field
Description
VPI
The virtual path identifier of the ATM PVC.
VCI
The virtual channel identifier of the ATM PVC.
QoS
The QoS category of the PVC. You can choose
UBR
,
CBR
,
rt-VBR
, or
nrt-VBR
.
PCR
Peak cell rate (PCR) is the maximum rate at which cells can be
transmitted along a connection in the ATM network. Its value
ranges from 1 to 65535.
CDVT
Cell delay variation tolerance (CDVT) is the amount of delay
permitted between ATM cells (in microseconds). Its value ranges
from 0 to 4294967295.
SCR
Subtain cell rate (SCR) is the maximum rate that traffic can pass
over a PVC without the risk of cell loss. Its value ranges from 0 to
65535.
MBS
Maximum burst size (MBS) is the maximum number of cells that
can be transmitted at the PCR. Its value ranges from 0 to 65535.
3.4.2.3 ADSL Setting
Click
ADSL Setting
in the left pane, the page shown in the following figure appears. In
this page, you can select the DSL modulation. Mostly, you need to remain this factory
default settings. The router supports these modulations:
G.Lite
,
G.Dmt
,
T1.413
,
ADSL2
,
ADSL2+
,
AnnexL
, and
AnnexM
. The router negotiates the modulation modes with the
DSLAM.
3.4.3 WLAN (ADW-4401 only)
Click
“WLAN”
and it will open out the Sub-Menu. It includes the
“Basic Settings”,
“Security”, “Access Control”, “”Multi-SSID”, “Advanced Settings” and “WPS”
.
43
