3.6.2 Routing
Choose
Advance > Routing
, the page shown in the follo wing figure appears. The p age
that is displayed contains
RIP
and
Static Route.
3.6.2.1 Static Route
Click
Static Route
in the lef t pane, the page shown in the following figure appears. This
page is used to configure the routing information. You can add or delete IP routes.
The following table describes the parameters and buttons of this page:
Field
Description
Enable
Select it to use static IP routes.
Destination
Enter the IP address of the destination device.
Subnet Mask
Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to
the destination device.
Metric
The metric cost for the destination.
Interface
The interface for the specified route.
Add Route
Click it to add the new static route to the
Static Route
Table
.
Update
Select a row in the
Static Route Table
and
modify the
parameters. Then click it to save the settings
temporarily.
44
