The following table describes the labels in this screen.
Parameter Description
IP Address
Enter the IP address you wish to use with your LAN here.
IP Subnet Mask
Enter the IP subnet mask you wish to use with your LAN here.
Dynamic Route
Select the Routing Information Protocol (RIP) you wish to use
from the dropdown list and the direction you want from the
dropdown list. The RIP and direction options are described
below.
Multicast
Select the multicast protocol you wish to use from the
dropdown list.
3.4.2.2 DHCP Server
D
ynamic
H
ost
C
ontrol
P
rotocol (DHCP), when enabled, gives out IP addresses to a
device that requests an IP address to be logged on to the network as it boots up. A
device must be configured as a DHCP client to obtain the IP address automatically. The
DHCP address pool contains the range of the IP address that will automatically be
assigned to the clients on the network.
The following table describes the labels in this screen.
Parameter Description
DHCP
Select whether DHCP is Disabled, Enabled or Relay.
32
Summary of Contents for 802.11n Wireless ADSL 2/2+ Router ADN-4000
Page 1: ...802 11n Wireless ADSL 2 2 Router ADN 4000 User s Manual ...
Page 6: ...Appendix A Glossary 85 ...
Page 16: ......
Page 19: ...Home Screen 19 ...
