Planet Networking & Communication wnap-7325, User Manual, Page: 55 / 95

User Manual of WNAP-7325/WNAP-7335
-54-
5.1.13 DHCP Server Settings
Click “ Operation Mode ”  “ AP Router ” or “ Wireless ISP ” and then enter the “ DHCP Server Settings ” by
clicking the Setup button next to it. This section allows you to configure the DHCP server.
Figure 5-25 DHCP Server Settings
Object Description

DHCP Server
Select as DHCP server or disable the function.

Lease Time
Select the time for using one assigned IP from the dropdown
list. After the lease time, the AP automatically assigns new IP
addresses to all connected computers.

From
The start IP address of all the available successive IPs.

To The end IP address of all the available successive IPs.
5.1.14 DMZ Settings
Click “ Operation Mode ”  “ AP Router ” or “ Wireless ISP ” and then enter the “ DMZ Settings ” by clicking the
Setup button next to it. This section allows you to configure the DMZ server.
Figure 5-26 DMZ Settings