Command Guide of WGSW-48040HP
Command:
loop-protect tx-mode
loop-protect
Loop protection configuration
tx-mode
Actively generate PDUs
Default:
Enabled
Usage Guide:
To enable
tx-mode
of
Loop protection
for specific interface
Example:
To enable
tx-mode
of
Loop protection
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
loop-protect tx-mode
4.2.45.59 mac address-table learning
Command:
mac address-table learning [secure]
mac
MAC keyword
address-table
MAC table configuration
learning
Port learning mode
secure
Port Secure mode
Default:
Enabled (Auto)
Usage Guide:
To enable
learning
of
MAC address table
for specific interface
Example:
To enable
learning
of
MAC address table
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
mac address-table learning
-99-
Summary of Contents for WGSW-48040HP
Page 1: ......
