Command Guide of WGSW-48040HP
Interface Rx Octets Tx Octets
---------------------- ------------------ ------------------
GigabitEthernet 1/1 0 0
4.20.18 show interface <port_type> <port_type_list> status
Command:
show interface <port_type> <port_type_list> status
show
Show running system information
interface
Interface status and configuration
status
Display status
Default:
N/A
Usage Guide:
To display the
port status
.
Example:
To display the
port status
for
interface GigabitEthernet 1/1
.
Switch #
show interface GigabitEthernet 1/1 status
Interface Mode Speed & Duplex Max Frame Excessive Link
---------------------- ------- --------------- --------- --------- --------
GigabitEthernet 1/1 enabled Auto 10056 Discard Down
4.20.19 show interface <port_type> <port_list> switchport
Command:
show interface <port_type> <port_list> switchport [ access | trunk | hybrid ]
show
Show running system information
interface
Interface status and configuration
switchport
Show interface switchport information
access
Show access ports status
hybrid
Show hybrid ports status
trunk
Show trunk ports status
-308-
Summary of Contents for WGSW-48040HP
Page 1: ......
