Command Guide of WGSW-48040HP
Command:
port-security
port-security
Enable/disable port security per interface.
Default:
Disabled
Usage Guide:
To enable
Port-security
for specific interface
Example:
To enable
Port-security
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
port-security
4.2.45.79 port-security maximum
Command:
port-security maximum <Number of addresses : 1-1024>
port-security
Enable/disable port security per interface.
maximum
Maximum number of MAC addresses that can be learned on this set of interfaces.
<Number of addresses : 1-1024>
Number of addresses
Default:
None
Usage Guide:
To configure number of
Port-security
addresses for specific interface
Example:
To configure 100
Port-security
addresses
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
port-security maximum 100
-110-
Summary of Contents for WGSW-48040HP
Page 1: ......