manualshive.com logo in svg

Planet Networking & Communication WGSW-48040HP, Command Manual

Looking to efficiently set up your network? Download the free Command Manual for the Planet Networking & Communication WGSW-48040HP. This comprehensive manual provides step-by-step instructions to maximize the potential of your device. Get your free copy now at manualshive.com.

Share
Download
background image

Command Guide of WGSW-48040HP

 

        low                 

Set priority to low.

 

 

Default:    

2 

Usage Guide:   

To configure interface priority of

 PoE 

for specific interface. 

Example:  

To configure interface priority (low)

 

of

 PoE 

for 

GigabitEthernet X/X.

 

 

Switch# configure terminal   

Switch (config)#

 

interface GigabitEthernet X/X

 

Switch (config-if) #

 poe priority low 

 

 

4.2.45.77 poe time-range   

Command:  

poe time-range { profile1 | profile2 | profile3 | profile4 } 

poe                     

Power Over Ethernet. 

        time-range       

To bind a PoE time-range to the corresponding port.

 

        profile1       

The profile name of the PoE time-range to be bound to the port.

 

        profile2       

The profile name of the PoE time-range to be bound to the port. 

        profile3       

The profile name of the PoE time-range to be bound to the port.

 

        profile4       

The profile name of the PoE time-range to be bound to the port.

 

 

Default:    

Profile 1 

Usage Guide:   

To configure time-range profile of

 PoE 

for specific interface. 

Example:  

To configure time-range profile (Profile 3)

 

of

 PoE 

for 

GigabitEthernet X/X.

 

 

Switch# configure terminal   

Switch (config)#

 

interface GigabitEthernet X/X

 

Switch (config-if) #

 poe time-range profile3 

 

 

4.2.45.78 port-security 

-109- 

Summary of Contents for WGSW-48040HP



































































































































































































































































































































































































Reviews:

No comments

Related manuals for WGSW-48040HP

Talkswitch switch Start Manual preview
switch
Brand: Talkswitch Pages: 17
Eaton Cutler-Hammer Quick Start Instructions preview
Cutler-Hammer
Brand: Eaton Pages: 8
Ribimex 124216 User And Maintenance Manual preview
124216
Brand: Ribimex Pages: 15
hager WXT30 Series Manual preview
WXT30 Series
Brand: hager Pages: 4
Oehlbach UltraHD Switch 3:1 User Manual preview
UltraHD Switch 3:1
Brand: Oehlbach Pages: 20
Watchguard XTM 3 Series Hardware Manual preview
XTM 3 Series
Brand: Watchguard Pages: 26
QSFPTEK S7300-48X2Q4C Quick Start Manual preview
S7300-48X2Q4C
Brand: QSFPTEK Pages: 12
Linkskey LKV-T02 Quick Installation Manual preview
LKV-T02
Brand: Linkskey Pages: 2
Anker AK-A7507011 Welcome Manual preview
AK-A7507011
Brand: Anker Pages: 16
Alloy POEFE8TV2 User Manual preview
POEFE8TV2
Brand: Alloy Pages: 13
Videosec RF-ZE901-220 Installation Manual preview
RF-ZE901-220
Brand: Videosec Pages: 3
IMC Networks PoE Giga-MiniMc Operation Manual preview
PoE Giga-MiniMc
Brand: IMC Networks Pages: 28
Harman AMX DVX-2265-4K Quick Start Manual preview
AMX DVX-2265-4K
Brand: Harman Pages: 2
Black Box ServSwitch Installing And Operating Information preview
ServSwitch
Brand: Black Box Pages: 2
S+S Regeltechnik PREMASREG 716x Series Operating Instructions, Mounting & Installation preview
PREMASREG 716x Series
Brand: S+S Regeltechnik Pages: 32
Comelit IPSWC160A Manual preview
IPSWC160A
Brand: Comelit Pages: 7
Airlink101 AKVM-2UA Quick Installation Manual preview
AKVM-2UA
Brand: Airlink101 Pages: 2
Analog way Eikos EKS500 Quick Start preview
Eikos EKS500
Brand: Analog way Pages: 4

Brands by name

Popular brands

Load more brands