Command Guide of WGSW-48040HP
To configure
PD Ping Alive Check
retry count of
PoE
for specific interface.
Example:
To configure
PD Ping Alive Check
retry count (5)
of
PoE
for
GigabitEthernet X/X.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
poe pdcheck retry-count 5
4.2.45.75 poe power limit
Command:
poe power limit { <Power in watts>}
poe
Power Over Ethernet.
power
Setting maximum power for port in allocation mode.
limit
The maximum power.
<Power in watts : option>
Maximum power for the interface (0-15.4 Watt for PoE
standard mode, 0-30.0 Watt for PoE plus mode)
Default:
2
Usage Guide:
To configure maximum power of
PoE
for specific interface.
Example:
To configure maximum power (29 watts)
of
PoE
for
GigabitEthernet X/X
.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
poe power limit 29
4.2.45.76 poe priority
Command:
poe priority { low | high | critical }
poe
Power Over Ethernet.
priority
Interface priority.
critical
Set priority to critical.
high
Set priority to high.
-108-
Summary of Contents for WGSW-48040HP
Page 1: ......
