Command Guide of WGSW-48040HP
Usage Guide:
To enable
SSM
of
SyncE
for specific interface
Example:
To enable
SSM
of
SyncE
for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
network-clock synchronization ssm
4.2.45.66 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
for specific interface
Example:
To enable the function (
network-clock synchronization ssm
)
for
GigabitEthernet X/X.
Switch# configure terminal
Switch (config)#
interface GigabitEthernet X/X
Switch (config-if) #
no network-clock synchronization ssm
4.2.45.67 ping ip
Command:
ping ip <ipv4_addr> size <size: 2-1452>
ping
The ping command allows you to test connectivity to a network host from the appliance
ip
ip
<ipv4_addr>
IP address
size
size
<size: 2-1452>
Default is 56 (excluding MAC, IP and ICMP headers)
-103-
Summary of Contents for WGSW-48040HP
Page 1: ......
