– 1 –
– 2 –
– 3 –
– 4 –
2. Physical Introduction
Front Panel of WDRT-1800AX
5GHz
Power
2.4GHz
Rear Panel of WDRT-1800AX
WPS (Press for 1 second)
LAN1~4 WAN
Reset (Press for 5 seconds)
Power
LAN4
LAN3
LAN2
LAN1
WAN
WPS/RST PWR
3. Hardware Installation
Step 1:
Locate the WDRT-1800AX in an optimum place, and adjust the
antenna for the best coverage.
LAN4
LAN3
LAN2
LAN1
WAN
WPS/RST PWR
Step 2:
Connect the Power Adapter provided in the package to the
WDRT-1800AX. The Power LED on the front panel will turn on
accordingly.
Power
Adapter
Power
LAN4
LAN3
LAN2
LAN1
WAN
WPS/RST PWR
Step 3:
Follow the figure below to connect the network devices. It
depends on your network environment to connect the WAN port
to a Cable/xDSL modem, or the Ethernet directly in your place.
WAN
Port
LAN4
LAN3
LAN2
LAN1
WAN
WPS/RST PWR
PC
LAN
Ports
RJ45
RJ45
Power
Adapter
Power
Cable/
xDSL Modem
xPON ONT
Phone
Jack
RJ11
Fiber
or
FTTx
1. Package Contents
►
WDRT-1800AX
Dual Band 802.11ax 1800Mbps
Wireless Gigabit Router
Thank you for choosing PLANET WDRT-1800AX. Before installing the
router, please verify the contents inside the package box.
WDRT-1800AX
Quick Guide
Ethernet Cable Power Adapter
Note
If there is any item missing or damaged, please contact the
seller immediately.
