3.2 Radio
The basic settings for wireless networking are set on this screen.
Parameter Descriptions
Disabled Wireless
Select this option will disable the wireless operation of WAP-4036.
Radio Band
The default setting is mixed mode [802.11B/G]. If you do not know or have
both 11g and 11b devices in your network, please keep the default setting in
mixed mode. From the drop-down manual, you can select 802.11G if you
have only 11G card. If you have only 802.11 B card, select 802.11B mode.
Radio Mode
The AP has 5 modes: AP, Client, Repeater, WDS, AP+WDS.
Note 1: if WDS or AP+WDS is selected, please go to “WDS” page to configure
related settings.
Note 2: when WAP-4036 is in Client mode, it allows only one Ethernet device
for connection.
Booster Mode
Enabled this mode can enhance the throughput of data transmission.
SSID
The SSID is the network name shared among all points in a wireless network.
The SSID must be identical for all devices in the wireless network. It is
case-sensitive and must not exceed 32 characters (use any of the characters
on the keyboard). Make sure this setting is the same for all points in your
wireless network. For added security, you should change the default SSID
(default) to a unique name.
13