65-401
Time Type User Command
0w 0d 0h 2m Telnet/SSH admin show history all-users detail 192.168.1.2:1419
0w 0d 0h 1m Telnet/SSH admin show history all-users 192.168.1.2:1419
0w 0d 0h 1m Console Null show history all-users
0w 0d 0h 1m Console Null end
0w 0d 0h 1m Console Null ip address 192.168.1.1 255.255.255.0
0w 0d 0h 0m Console Null in v 1
0w 0d 0h 0m Console Null telnet-server enable
65.14 show logging buffered
Command:
show logging buffered [level {
critical
|
warnings
} | range <
begin-index
> <
end-index
>]
Function:
This command displays the detailed information in the log buffer channel. This command is not supported on low
end switches.
Parameter:
level {
critical
|
warnings
}
means
the level of critical information.
<
begin-index
>
is the index start value of the log
message, the valid range is 1-65535,
<end-index>
is the index end value of the log message, and the valid range is
1-65535. When only display logging buffered information of the line card must be added range parameter, but the
main control has not the request.
Command Mode:
Admin and Configuration Mode.
Default:
No parameter specified indicates all the critical log information will be displayed.
Usage Guide:
Warning and critical log information is saved in the buffer zone. When displayed to the terminal, their display format
should be: index ID time <level> module ID [mission name] log information.