54-306
Switch(mrpp-ring-4000)#hello-timer 6
Switch(mrpp-ring-4000)#enable
Switch(mrpp-ring-4000)#exit
Switch(config)#in ethernet1/1
Switch(config-If-Ethernet1/1)#mrpp ring 4000 primary-port
Switch(config)#in ethernet 1/3
Switch(config-If-Ethernet1/3)#mrpp ring 4000 secondary-port
54.5 errp domain
Command:
errp domain <
domain-id
>
no errp domain <
domain-id>
Function:
Create ERRP domain, the no command deletes the configured ERRP domain.
Parameter:
<
domain-id
>
domain ID of ERRP, the range between 1 and 15.
Command Mode:
Global mode
Usage Guide:
If domain ID of ERRP needs to be configured, the compatible mode of ERRP should be enabled firstly. When
executing this command, it should create a new ERRP domain if there is no ERRP domain. However, the no
command is used to delete the corresponding domain ID of ERRP.
Example:
Configure domain ID for ERRP globally.
Switch(Config)#errp domain 1