11-223
11.23 ethernet-oam timeout
Command:
ethernet-oam timeout
<seconds>
no ethernet-oam timeout
Function:
Configure the timeout of OAM connection, no command restores the default value.
Parameters:
<
seconds
>
, the timeout ranging from 5 to 10 seconds.
Command Mode:
Port mode
Default:
5s.
Usage Guide:
OAM connection will be disconnected if no OAMPDU is received after specified timeout.
Example:
Set the timeout of OAM connection for ethernet 1/4 to be 6 seconds.
Switch(Config-If-Ethernet1/4)#ethernet-oam timeout 6
11.24 show ethernet-oam
Command:
show ethernet-oam [{local | remote} interface {ethernet |} <
IFNAME
>]
Function:
Show Ethernet OAM connection of specified or all ports.
Parameters:
Overview information of all Ethernet OAM connections will be shown if no parameters is input
local
, show detailed information of local OAM connection
remote
, show detailed information of remote OAM connection
<
IFNAME
>
, the port that OAM connection information will be shown