Command Guide of MGSW-28240F
4.2.203 transport email from
Command:
transport email from <mail_addr> subject <title>
transport
Enable or disable transport email function.
Enable or disable transport email function.
from
sender's email address
<mail_addr>
mail address
subject
subject/title of the email
<title>
email title
Default:
N/A
Usage Guide:
To configure SMTP sender's email address and title of the email
Example:
To configure SMTP sender's email address (
) and title of the email (
syserror
)
Switch# configure terminal
Switch (config)#
transport email from [email protected] subject syserror
4.2.204 transport email smtp-server
Command:
transport email smtp-server { <ipv4_addr> | <server> } port <1_to_65535>
transport
Enable or disable transport email function.
Enable or disable transport email function.
smtp-server
Set the SMTP server name or IP address of the SMTP server
<ipv4_ucast>
<ipv4_addr>: IP address
<server>
hostname
port
port
<1-65535>
port_number: Specifies the port number. The range is from 1 to 65535. The default port
number is 25.
Default:
N/A
-310-
