User’s Manual of LRP-822CS/LRP-1622CS
187
4.7.6 Multicast Throttling Setting
Multicast throttl
mum number of multicast groups that a port can join at the same time. When the maximum
number of groups is reached on a port, the switch can take one of two actions; either “deny” or “replace”. If the action is set to
e
in reports will be dropped. If the action is set to replace, the switch randomly removes an existing
th the new mul
Once you have configured multicast profiles, you can assign them to interfaces on the LRP Managed Switch. Also you can set
h
he nu
oin at the same time. The MAX Group
and Informati
screens in
Figure 4-7-34
&
Figure 4-7-35
appear.
ing sets a maxi
d ny, any new multicast jo
group and replaces it wi
ticast group.
t e multicast throttling number to limit t
on
mber of multicast groups an interface can j
Figure 4-7-34
Max Groups and Action Setting Page Screenshot
The page includes the following fields:
Object
Description
IP Type
Select IPv4 or IPv6 from this drop-down list
Port Select
Select port number from this drop-down list
Max Groups
Sets the maximum number of multicast groups an interface can join at the same
time.
Range: 0-256;
Default:
256
Action
Sets the action to take when the maximum number of multicast groups for the
interface has been exceeded.
(Default: Deny)
-
Deny
- The new multicast group join report is dropped
-
Replace
- The new multicast group replaces an existing group
Buttons
: Click to apply changes.