User’s Manual of IMG-120T
-46-
4.3 Network Settings
This function allows setting the value for network configuration. For the IP address, set the values of IP Address,
Subnet Mask and Gateway. For the DNS server address, set the value of DNS Server. Press the
“Submit”
button to finish the settings as shown in Figure 4-3.
Figure 4-3:
Network Settings Screen
The page includes the following configurable data:
Network Settings
•
Use the following IP
Address
Choose static IP address for the Industrial Modbus Gateway.
•
Automatically Obtain
IP Address
Enable the DHCP function for the Industrial Modbus Gateway.
When enabling this function, the Industrial Modbus Gateway will send a
DHCP request to the DHCP server in the network. Once the DHCP Server
gets the request, it will assign a dynamic IP address, subnet mask and
gateway to the Industrial Modbus Gateway. The factory default setting is
“Disable”
.
•
IP Address
Manually assign IP address to the Industrial Modbus Gateway.
The factory default value is
192.168.0.100
•
Subnet Mask
Manually assign subnet mask to the Industrial Modbus Gateway.
The factory default value is
255.255.255.0
•
Gateway
Manually assign Gateway to the Industrial Modbus Gateway.
The factory default value is
192.168.0.254
•
Use the following
DNS Server Address
Choose static IP address for the DNS server of Industrial Modbus
Gateway.
