User’s Manual of IMG-120T
-19-
3.3 Management Methods
The
way to manage the Industrial Modbus Gateway:
-
Web Management
interface
-
Remote IP-based Telnet
interface
3.3.1 Web Management Interface
The Industrial Modbus Gateway offers management features that allow users to manage the Industrial Modbus
Gateway from anywhere on the network through a standard browser such as Microsoft Internet Explorer. After
you set up your IP address for the Industrial Modbus Gateway, you can access the Industrial Modbus Gateway’s
Web interface applications directly in your Web browser by entering the IP address of the Industrial Modbus
Gateway.
Figure 3-3:
Web Management Diagram
You can then use your Web browser to list and manage the Industrial Modbus Gateway configuration parameters
from one central location. Web Management requires either
Microsoft Internet Explorer 8.0
or later,
Chrome
,
Safari
or
Mozilla Firefox 1.5
or later.
3.3.2 Login the Industrial Modbus Gateway Web Interface
The following shows how to start up the
Web Management
of the Industrial Modbus Gateway. Note the Industrial
Modbus Gateway is configured through an Ethernet connection. Please make sure the manager PC must be set
to the same
IP subnet address
.
For example, the default IP address of the Industrial Modbus Gateway is 192.168.0.100, then the manager PC
should be set to 192.168.0.x (where x is a number between 1 and 254, except 100) and the default subnet mask
is 255.255.255.0.
Logging in to the Industrail Modbus Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
Web interface.
2. When the following dialog box appears, please enter the default user name and password “
admin
”. The
login screen in Figure 3-4 appears.
Default Username:
admin
Default Password:
admin
